7700 Single Hung Window

$25.00

Product Details

Specifications

  • Maximum Frame Size: 53-1/8” x 74-1/4”
  • Maximum Design Pressure: +80 / -80 PSF
  • Glass Thickness: 5/16” or 11/16 IG
  • Glass Components: Per Product Approval
  • Muntin: Profile Exterior/Flat Interior
  • Frame Color: White, Bronze
  • Frame Depth: 2-5/8”
Categories: ,

Description

Specifications

  • Maximum Frame Size: 53-1/8” x 74-1/4”
  • Maximum Design Pressure: +80 / -80 PSF
  • Glass Thickness: 5/16” or 11/16 IG
  • Glass Components: Per Product Approval
  • Muntin: Profile Exterior/Flat Interior
  • Frame Color: White, Bronze
  • Frame Depth: 2-5/8”

Features & Benefits

  • Block and tackle balance for easy vent removal.
  • Bottom sill latch eliminates possible accessibility conflict.
  • Extruded aluminum snap-on glazing bead provides a strong, clean and neat appearance.
  • Tubular horizontal rails reduce bowing.
  • Single plane weathering eliminates gaps that permit air leakage.
  • Fin-seal provides highly efficient weather-stripping.
  • Recessed jamb installation holes so screw heads won’t interfere with balance travel.
  • Vent lift rail provides ease of grasping vent.
  • Sill riser and vent rail are both weathered providing the most efficient defense against air and water penetration.
  • Profile extruded aluminum muntins have a pleasing appearance that match muntins on our other impact products.
  • Frame depth is 2-5/8” making it a practical depth to match most commonly available wood bucks.

General Information

Sliding glass doors shall be of Series 9200 as manufactured by Lawson Industries, Inc., Medley, Florida, USA. Conforming with A.N.S.I./A.A.M.A. 103.3-93, for S.G.D. C40 to C50, A.A.M.A. 1302.5-76 for forced entry resistance, and F.B.C. TAS 201, TAS 202 and TAS 203. Miami Dade County Florida notice of acceptance, and Florida Building Code (F.B.C.)

CONSTRUCTION

All door members shall be of commercial quality 6063 aluminum alloy to T5 and T6 temper. Door stiles shall be notched to allow top and bottom rails to telescope into stiles for maximum strength. Locking and fixed stiles to be of tubular design with minimum dimension of 2-5/8” x 1-1/2”. Tubular interlock stiles shall have a minimum dimension of 2-1/2” x 1-1/2”. Both vertical stiles and horizontal rails are an assembly consisting of the base extrusion, and a snap fitted aluminum glazing adaptor containing a compressible (geon) vinyl bulb, applied to the exterior of each panel member to conceal and protect the glazing rebate. Tracks shall be of sloped exterior design with a 2-1/4” vertical riser as standard. An optional track with 3” vertical riser shall be available for conditions requiring higher positive pressures. Top of vertical door stiles shall be joined to horizontal rails using two #10 x 3/4” sheet metal screws. Bottom door rails shall be joined to stile using one #10 x 3/4” sheet metal screw.

HARDWARE

Latch shall be surface mounted in white or black pained finish with integral interior and exterior pull handle. Positive acting thumb turn on interior will actuate steel mortise bolt. Latch housing shall contain adjustment feature, which will permit alteration of bolts travel, facilitating minute adjustments if necessary. Surface mounted hardened steel door keeper shall also provide for vertical adjustment. A high quality 5 pin cylinder key-lock to actuate the door latch from the exterior is an added option. Key-locks may be keyed alike or master keyed upon special order at additional cost. Bottom door rail shall contain two tandem roller assemblies, each assembly containing two 1-3/4” diameter ball bearing rollers, assembled with hardened steel inner and outer race. Stainless steel wheels are available at added cost. Each bottom rail shall have a 7/16” diameter access hole in its exterior surface that permits entry of adjustment tool which when turned will raise or lower door. Each adjustment hole shall be protected by a 7/16” diameter nylon port hole cover.

FINISH

Heavy duty screen with tubular extruded stiles and rails resist bowingDoors, jambs and headers shall receive an electro-statically applied 1.0 mil dry fill thickness coating which meets the performance requirements of A.A.M.A. 603.5 in a choice of bronze or white. All tracks and thresholds shall be finished.

MUNTINS

When specified, muntins shall be 1-1/8” wide x .062” aluminum applied to both interior and exterior sides of glass, in color to match door components.

WEATHERSTRIPPING

Double weather stripping throughout unit shall be water resistant polypropylene pile, and virgin PVC vinyl.

SCREENS

Furnished when specified. Vertical and horizontal members shall be tubular sections with spring loaded rollers in identical top and bottom rails for easy reversing. Positive action screen latch shall be self-reversing. Screen shall have effective insect proofing. All corners are joined using 2 #8 x 1-1/2” sheet metal screws.

GLAZING

Doors shall be glazed using 7/16” thick laminated glass consisting of one lite of 3/16” heat strengthened glass on inboard and outboard side and an .090 polyvinyl butyral (PVB) interlayer. Glass of varying colors shall be specified.

GLASS

Doors shall be glazed using 7/16” thick laminated glass consisting of one lite of 3/16” heat strengthened glass on inboard and outboard side and an .090 polyvinyl butyral (PVB) interlayer. Glass of varying colors shall be specified.

Additional information

Performance

Energy Efficient, Hurricane Impact-Resistant, Noise Reduction, Security, Strength And Performance